| Customization: | Available |
|---|---|
| Certification: | ISO |
| Condition: | New |
|
Still deciding? Get samples of US$ 945/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
STG-5X Electric hydraulic roll pipe grooving machine 1"-12" is a motor driven roll groover designed with an advanced hydraulic feeding system. It can form roll grooves in carbon steel and stainless steel pipe of 1" thru 8" diameter SCH10/40 and 10" thru 12" SCH10/20 pipes. The grooves are formed by mechanically advancing a grooving roller into the pipe which is supported by a knurl drive roller. The only adjustment necessary is for the depth of the groove. Unique integrated drive roller with draft shaft reduces the chance of drive shaft break. The STG-5X Electric Hydraulic Roll Groover is an ideal tool for light and medium volume work on job site and for workshop in-house fabrication on all 1"~12" pipes.
Model: STG-5X
Universal electrical hydraulic roll grooving machine 1"~12"
Single phase motor 1100W
Max pipe wall thickness (mm): 8.0mm
Roller set for 1" ~1½"
Roller set for 2" ~ 6"
Roller set for 8" ~ 12"
5-feet joint-ball pipe support 1"~12"
Foot switch and Pipe stabilizer
How To Change Roll Sets
1. Open the relief valve on hydraulic pump counter-clockwise and raise the groove roller to the top position. Refer to No. 1.
2. Remove Groove Roll
Loose the setscrew on the side block with a 3/16" (5mm) hex wrench. Grasp the groove roller steady and draw out the groove shaft from the side block. Refer to No. 2.
3. Remove Drive Roll
Loose the flush bolt in the center of drive shaft with a 5/16"(10mm) hex wrench. Grasp the knurl drive roller and draw the drive shaft out.
4. Reverse step 2 & 3, install suitable groove roller and drive roller shaft as demanded.
* All rollers may use flat bearing. Do not drop the bearings and covers.
){kind=link}